AMK Office 2


September 27, 2011

Raymond, Alberta

American Creek Resources Ltd. (TSX-V:AMK / OTC:ACKRF) has received results from metallurgical work done to samples taken from the Ironmist property.  In August, 2011, approximately 50kg of surface samples were provided to ALS Ammtec in Perth Australia for metallurgical testing.  Metallurgical supervision and reporting was provided by ProMet Engineers Pty. Ltd., also of Perth Australia.

The September 2011 ProMet report highlighted the following:

  • DTR tests indicated weight recovery of 73% at 45 microns with an iron grade of 66.3%, silica at 0.4%, 2.6% Al2O3 and 3.4% TiO2.
  • 57% rejection of tails at 80% passing 500 microns and greater than 20% at the first separation size of 80% passing 3mm.
  • Vanadium content is between 0.6% and 0.8%.
  • The grades listed above can be achieved using a crush and milling process to 45 microns P80.
  • The Bond Work Index results indicated a BWI of 18.0 kWh/t.
  • Further drilling needs to be undertaken to increase the data available for the deposit.
  • As noted above, more drilling, with further DTR and metallurgical testing, will be necessary to move the project forward.

    Mike Becherer, P.Geo. is the Qualified Person for the Ironmist project pursuant to NI 43-101.  Mr. Becherer has reviewed and approved the content of this press release.

    American Creek Resources Ltd. is a Canadian junior mineral exploration company focused on the acquisition, exploration and development of mineral deposits within the Province of British Columbia, Canada.

    For further information please contact Darren Blaney at:  Phone: 403 752-4040 or Email:  This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it..  Information relating to the Corporation is available on its website at

    Certain information contained in this news release constitutes forward-looking statements regarding the Corporation’s mineral properties. Forward looking statements are frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate" or statements that certain events or conditions "may" or "will" occur. Forward-looking statements are based on the reasonable opinions and estimates of management of American Creek and are subject to a variety of risks, uncertainties and other factors that could cause actual events or results to differ materially from those projected in the forward-looking statements. These factors include: the inherent risks involved in the exploration and development of mineral properties, uncertainties involved in the interpretation of drill results and other geological data, fluctuating commodity prices, unforeseen permitting requirements, changes in environmental laws or regulations, the possibility of project cost overruns or unanticipated costs and expenses, weather conditions, the availability of contractors for equipment and services, the availability of future financing and general business and economic conditions. Such statements are also based on a number of assumptions which may prove to be incorrect, including assumptions about general business and economic conditions being accurate, the timing and receipt of regulatory approvals for projects and operations, the availability of financing, the ability to secure equipment and labour, and American Creek’s ongoing relationship with third parties. The foregoing factors, risks and assumptions are not exhaustive. Events or circumstances could cause actual events or results to differ materially from those estimated or projected and expressed in, or implied by, these forward-looking statements. Accordingly, readers should not place undue reliance on forward-looking statements. These forward-looking statements are as of the date they are made and American Creek disclaims any obligation to update any forward-looking statements, except as required by law.

    Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.